Offshore Products

Yoke Grade 10 Clevis Self Locking Hook EN1677

All Grade 10 lifting components sold by William Hackett Lifting Products comply fully with the relevant section of EN1677, ASTM A952/A and DIN PAS 1061. The grade 10 components are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load. The full compliance of these components means that they can be used in chain slings certified to EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.

METRIC SPECIFICATIONS

Part
Code
Chain
Size mm
A
mm
H
mm
K
mm
P
mm
T
mm
WLL
tonnes

Box
Quantity

Mass
Kg

X-026-06 6 6 19 93 28 15 1.4 40 0.4
X-026-07 7/8 9 24 119 34 20 2.5 20 0.9
X-026-10 10 11 30 142 44 26 4.0 15 1.4
X-026-13 13 14 39 178 51 30 6.7 6 3.0
X-026-16 16 18 49 213 60 36 10.0 4 5.0
X-026-20 20 21 65 244 70 53 16.0 2 11.0
X-026-22 22 24 63 273 80 49 19.0 2 12.8

IMPERIAL SPECIFICATIONS

Part
Code
Chain
Size inch
A
inch
H
inch
K
inch
P
inch
T
inch
WLL
lbs

Box
Quantity

Mass
lbs

X-026-06 1/4 0.24 0.75 3.66 1.10 0.59 3000 40 0.88
X-026-07 5/16 0.35 0.94 4.68 1.33 0.78 5500 20 1.98
X-026-10 3/8 0.43 1.18 5.59 1.73 1.02 8800 15 3.08
X-026-13 1/2 0.51 1.54 7.00 2.00 1.18 14700 6 6.61
X-026-16 5/8 0.70 1.93 8.38 2.36 1.41 22000 4 11.02
X-026-20 3/4 0.83 2.56 9.60 2.75 2.08 35000 2 24.25
X-026-22 7/8 0.94 2.48 10.74 3.15 1.93 41500 2 28.22
Download PDF

Please provide us with a few details about yourself. After you have done this, you will be able to download as many PDF documents of our products as you like for 1 hour until you are asked to submit this form again.