Offshore Products

Yoke Grade 10 Clevis Sling Hook with Latch EN1677-1+2

All Grade 10 lifting components sold by William Hackett Lifting Products comply fully with the relevant section of EN1677, ASTM A952/A and DIN PAS 1061. The grade 10 components are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load. The full compliance of these components means that they can be used in chain slings certified to EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.

METRIC SPECIFICATIONS

Part Code

Chain
Size mm
A
mm
H
mm
K
mm
P1
mm

T
mm

WLL
tonnes

Box
Quantity

Mass
Kg

X-043/S-06 6 6 23 79 23 15 1.4 40 0.3
X-043/S-07 7/8 9 22 98 27 18 2.5 30 0.6
X-043/S-10 10 11 30 122 34 24 4.0 15 1.2
X-043/S-13 13 14 37 147 44 30 6.7 8 2.3
X-043/S-16 16 17 42 166 48 39 10.0 6 3.9
X-043/S-20 20 24 64 207 57 48 16.0 3 8.6
X-043/S-22 22 25 61 217 73 52 19.0 2 8.6

IMPERIAL SPECIFICATIONS

Part Code

Chain
Size inch
A
inch
H
inch
K
inch
P1
inch

T
inch

WLL
lbs

Box
Quantity

Mass
lbs

X-043/S-06 1/4 0.24 0.90 3.82 0.90 0.59 3000 40 0.66
X-043/S-07 5/16 0.35 0.86 3.86 1.06 0.71 5500 30 1.32
X-043/S-10 3/8 0.43 1.18 4.80 1.34 0.94 8800 15 2.64
X-043/S-13 1/2 0.51 1.45 5.79 1.73 1.18 14700 8 5.07
X-043/S-16 5/8 0.66 1.65 6.54 1.89 1.54 22000 6 8.59
X-043/S-20 3/4 0.94 2.52 8.15 2.24 1.89 35000 3 18.95
X-043/S-22 7/8 0.98 2.40 8.54 2.87 2.05 41500 2 18.95
Download PDF

Please provide us with a few details about yourself. After you have done this, you will be able to download as many PDF documents of our products as you like for 1 hour until you are asked to submit this form again.