Offshore Products

Yoke Grade 10 Eye Grab Hook EN 1677-1+2

All Grade 10 lifting components sold by William Hackett Lifting Products comply fully with the relevant section of EN1677, ASTM A952/A and DIN PAS 1061. The grade 10 components are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load. The full compliance of these components means that they can be used in chain slings certified to EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.

METRIC SPECIFICATIONS

Part
Code
Chain
Size mm
A
mm
F
mm
G
mm
K
mm
P
mm
WLL
tonnes
Box
Quantity
Mass
Kg
X-041-06 6 13 26 8 50 8 1.4 100 0.2
X-041-07 7,8 16 30 9 62 10 2.5 80 0.3
X-041-10 10 20 40 13 82 13 4.0 40 0.6
X-041-13 13 26 52 16 107 17 6.7 12 1.4
X-041-16 16 30 57 20 132 21 10.0 10 2.4
X-041-20 20 38 73 24 147 23 16.0 6 4.0
X-041-22 22 38 70 26 164 26 19.0

5

5.0

X-041-26 26 50 100 32 207 33 26.5

2

10.0

X-041-32 32 62 130 42 266 42 40.0

1

19.7

IMPERIAL SPECIFICATIONS

Part
Code
Chain
Size inch
A
inch
F
inch
G
inch
K
inch
P
inch
WLL
lbs
Box
Quantity
Mass
lbs
X-041-06 1/4 0.51 1.02 0.31 1.97 0.31 3000 100 0.44
X-041-07 5/16 0.63 1.18 0.35 2.40 0.39 5500 80 0.66
X-041-10 3/8 0.78 1.57 0.51 3.23 0.51 8800 40 1.32
X-041-13 1/2 1.02 2.05 0.69 4.21 0.67 14700 12 3.08
X-041-16 5/8 1.81 2.24 0.78 5.19 0.82 22000 10 5.29
X-041-20 3/4 1.49 2.87 0.94 5.78 0.91 35200 6 8.81
X-041-22 7/8 1.49 2.75 1.02 6.45 1.02 41800

5

11.02
X-041-26 1 1.97 3.94 1.29 8.14 1.29 58400

2

22.26

X-041 1-17/64 2.44 5.11 1.65 10.47 1.65 88185

1

43.43

Download PDF

Please provide us with a few details about yourself. After you have done this, you will be able to download as many PDF documents of our products as you like for 1 hour until you are asked to submit this form again.